New Released Free Version of Microsoft 70-410 Exam Study Materials in Lead2pass (31-40)

Lead2pass are providing complete solutions for Microsoft 70-410that will help the candidates learn extensively and score exceptional in the Microsoft ’s  70-410 exam. Passing the Microsoft is not a dream anymore as our user friendly learning resources ensure guaranteed success.

QUESTION 31
Your network contains an Active Directory domain named contoso.com.
The domain contains a domain controller named DC1 that runs Windows Server 2012 R2.
You need to configure a central store for the Group Policy Administrative Templates.
What should you do on DC1?

A.    From Server Manager, create a storage pool.
B.    From Windows Explorer, copy the PolicyDefinitions folder to the SYSVOL\contoso.com\policies folder.
C.    From Server Manager, add the Group Policy Management feature
D.    From Windows Explorer, copy the PolicyDefinitions folder to the NETLOGON share.

Answer: B

QUESTION 32
You install Windows Server 2012 R2 on a standalone server named Server1.
You configure Server1 as a VPN server.
You need to ensure that client computers can establish PPTP connections to Server1.
Which two firewall rules should you create? (Each correct answer presents part of the solution. Choose two.)

A.    An inbound rule for protocol 47
B.    An outbound rule for protocol 47
C.    An inbound rule for TCP port 1723
D.    An inbound rule for TCP port 1701
E.    An outbound rule for TCP port 1723
F.    An outbound rule for TCP port 1701

Answer: AC
Explanation:
To enable VPN tunnels between individual host computers or entire networks that have a firewall between them, you must open the following ports:
PPTP
To allow PPTP tunnel maintenance traffic, open TCP 1723. To allow PPTP tunneled data to pass through router, open Protocol ID 47. http://www.windowsitpro.com/article/pptp/which-ports-do-you-need-to-open-on-a-firewall-to- allow-pptp-andl2tp-over-ipsec-vpn-tunnels–46811
If you use a personal firewall or a broadband router, or if there are routers or firewalls between the VPN client and the VPN server, the following ports and protocol must be enabled for PPTP on all firewalls and routers that are between the VPN client and the VPN server:
Client ports Server port Protocol
1024-65535/TCP 1723/TCP PPTP
Additionally, you must enable IP PROTOCOL 47 (GRE).
http://support.microsoft.com/kb/314076/en-us

QUESTION 33
Your network contains an Active Directory domain named adatum.com. The computer accounts for all member servers are located in an organizational unit (OU) named Servers.
You link a Group Policy object (GPO) to the Servers OU.
You need to ensure that the domain’s Backup Operators group is a member of the local Backup Operators group on each member server.
The solution must not remove any groups from the local Backup Operators groups.
What should you do?

A.    Add a restricted group named adatum\Backup Operators.
Add Backup Operators to the This group is a member of list.
B.    Add a restricted group named adatum\Backup Operators.
Add Backup Operators to the Members of this group list.
C.    Add a restricted group named Backup Operators.
Add adatum\Backup Operators to the This group is a member of list.
D.    Add a restricted group named Backup Operators.
Add adatum\Backup Operators to the Members of this group list.

Answer: A

QUESTION 34
Your network contains an Active Directory domain named contoso.com. All servers run Windows Server 2012 R2. An application named Appl.exe is installed on all client computers. Multiple versions of Appl.exe are installed on different client computers. Appl.exe is digitally signed.
You need to ensure that only the latest version of Appl.exe can run on the client computers.
What should you create?

A.    An application control policy packaged app rule
B.    A software restriction policy certificate rule
C.    An application control policy Windows Installer rule
D.    An application control policy executable rule

Answer: D

QUESTION 35
Your network contains an Active Directory domain named contoso.com.
All domain controllers run Windows Server 2012 R2.
You need to ensure that the local Administrator account on all computers is renamed to L_Admin. Which Group Policy settings should you modify?

A.    Security Options
B.    User Rights Assignment
C.    Restricted Groups
D.    Preferences

Answer: A

QUESTION 36
You have a server that runs Windows Server 2012 R2. The disks on the server are configured as shown in the exhibit. (Click the Exhibit button.)
You need to create a storage pool that contains Disk 1 and Disk 2.
What should you do first?

wps2A13.tmp_thumb

A.    Delete volume E
B.    Convert Disk 1 and Disk 2 to dynamic disks
C.    Convert Disk 1 and Disk 2 to GPT disks
D.    Create a volume on Disk 2

Answer: A
Explanation:
A. Storage Pools use unallocated space
There is no way to create a storage pool with existing data.
Storage pools are only a collection ofdrives that are managed by windows.
http://technet.microsoft.com/en-us/library/ff399688.aspx
http://technet.microsoft.com/en-us/library/hh758075.aspx

QUESTION 37
You have a server named Server1 that runs Windows Server 2012 R2.
You add a 4-TB disk named Disk 5 to Server1.
You need to ensure that you can create a 3-TB volume on Disk 5.
What should you do?

A.    Create a storage pool.
B.    Convert the disk to a dynamic disk.
C.    Create a VHD, and then attach the VHD.
D.    Convert the disk to a GPT disk.

Answer: D
Explanation:
MBR max is 2TB, the disk must be GPT
For any hard drive over 2TB, we need to use GPT partition. If you have a disk larger than 2TB size, the rest ofthe disk space will not be used unless you convert it to GPT. An existing MBR partition can’t be converted to GPT unless it is completely empty; you must either deleteeverything and convert or create the partition as GPT. It is not possible to boot to a GPT partition, impossible to convert MBR to GPT without data loss.
http://msdn.microsoft.com/en-us/library/windows/hardware/gg463525.aspx

QUESTION 38
You have a server named Server1 that has a Server Core installation of Windows Server 2008 R2. Server1 has the DHCP Server server role and the File Server server role installed.
You need to upgrade Server1 to Windows Server 2012 R2 with the graphical user interface (GUI). The solution must meet the following requirements:
– Preserve the server roles and their configurations.
– Minimize Administrative effort.
What should you do?

A.    On Server1, run setup.exe from the Windows Server 2012 R2 installation media and select Server with a GUI.
B.    Start Server1 from the Windows Server 2012 R2 installation media and select Server Core Installation. When the installation is complete, add the Server Graphical Shell feature.
C.    Start Server1 from the Windows Server 2012 R2 installation media and select Server with a GUI.
D.    On Server1, run setup.exe from the Windows Server 2012 R2 installation media and select Server Core Installation.
When the installation is complete, add the Server Graphical Shell feature.

Answer: D
Explanation:
A. Server is on 2008 R2 core, must install 2012 R2 core and then GUI
B. Not least effort
C. Not least effort
D. Upgrade to 2012 R2 and install GUI shell
http://technet.microsoft.com/en-us/library/jj574204.aspx
Upgrades that switch from a Server Core installation to the Server with a GUI mode of Windows Server 2012 R2 in one step (and vice versa) are not supported. However, after upgrade is complete, Windows Server 2012 R2 allows you to switch freely between Server Core and Server with a GUI modes. For more information about these installation options, how to convert between them, and how to use the new Minimal Server Interface and Features on Demand, see
http://technet.microsoft.com/library/hh831786.

QUESTION 39
Your network contains two servers named Server1 and Server2 that run Windows Server 2012 R2.
You need to install the Remote Desktop Services server role on Server2 remotely from Server1.
Which tool should you use?

A.    The dsadd.exe command
B.    The Server Manager console
C.    The Remote Desktop Gateway Manager console
D.    The Install-RemoteAccess cmdlet

Answer: B

QUESTION 40
You have a server named Server1 that runs a full installation of Windows Server 2012 R2.
You need to uninstall the graphical user interface (GUI) on Server1.
You must achieve this goal by using the minimum amount of Administrative effort.
What should you do?

A.    Reinstall Windows Server 2012 R2 on the server.
B.    From Server Manager, uninstall the User Interfaces and Infrastructure feature.
C.    From Windows PowerShell, run Uninstall-WindowsFeature PowerShell-ISE
D.    From Windows PowerShell, run Uninstall-WindowsFeature Desktop-Experience.

Answer: B

The strength of Lead2pass training products is the constant update that we perform to keep abreast with the market trends and changes. Lead2pass 70-410 training program is not only the best option for certification but also enhances your skill to an advance level. You save both, time and money. As a matter of fact, our training products is backed by 100% money back guarantee.

http://www.lead2pass.com/70-410.html

         

Why Choose Lead2pass?

If you want to pass the exam successfully in first attempt you have to choose the best IT study material provider, in my opinion, Lead2pass is one of the best way to prepare for the exam.

Lead2pass Testking Pass4sure Actualtests Others
$99.99 $124.99 $125.99 $189 $29.99-$49.99
Up-to-Dated
Real Questions
Error Correction
Printable PDF
Premium VCE
VCE Simulator
One Time Purchase
Instant Download
Unlimited Install
100% Pass Guarantee
100% Money Back

Comments are closed.