Free Lead2pass Microsoft 70-410 PDF&VEC Dumps with New Update Exam Questions (131-140)

Lead2pass is providing complete solutions for Microsoft 70-410 that will help the candidates learn extensively and score exceptional in the Microsoft ’s  70-410 exam. Passing the Microsoft is not a dream anymore as our user friendly learning resources ensure guaranteed success.

QUESTION 131
Your network contains an Active Directory domain named contoso.com.
All servers run Windows Server 2012 R2.
Client computers run either Windows 7 or Windows 8.
All of the computer accounts of the client computers reside in an organizational unit (OU) named Clients. A Group Policy object (GPO) named GP01 is linked to the Clients OU. All of the client computers use a DNS server named Server1.
You configure a server named Server2 as an ISATAP router.
You add a host (A) record for ISATAP to the contoso.com DNS zone.
You need to ensure that the client computers locate the ISATAP router.
What should you do?

A.    Run the Add-DnsServerResourceRecord cmdlet on Server1.
B.    Configure the DNS Client Group Policy setting of GPO1.
C.    Configure the Network Options Group Policy preference of GPO1.
D.    Run the Set-DnsServerGlobalQueryBlockList cmdlet on Server1.

Answer: D

QUESTION 132
Your network contains an Active Directory domain named contoso.com.
The domain contains a server named Server1 that runs Windows Server 2012 R2 and has the Remote Access server role installed.
A user named User1 must connect to the network remotely. The client computer of User1 requires Challenge Handshake Authentication Protocol (CHAP) for remote connections.
CHAP is enabled on Server1.
You need to ensure that User1 can connect to Server1 and authenticate to the domain.
What should you do from Active Directory Users and Computers?

A.    From the properties of Server1, select Trust this computer for delegation to any service (Kerberos only).
B.    From the properties of Server1, assign the Allowed to Authenticate permission to User1.
C.    From the properties of User1, select Use Kerberos DES encryption types for this account.
D.    From the properties of User1, select Store password using reversible encryption.

Answer: D

QUESTION 133
Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that runs Windows Server 2012 R2. Server1 has the Hyper-V server role installed. Server1 has a virtual switch named RDS Virtual.
You replace all of the network adapters on Server1 with new network adapters that support single-root I/O visualization (SR-IOV).
You need to enable SR-IOV for all of the virtual machines on Server1.
Which two actions should you perform? (Each correct answer presents part of the solution.
Choose two.)

A.    On each virtual machine, modify the Advanced Features settings of the network adapter.
B.    Modify the settings of the RDS Virtual virtual switch.
C.    On each virtual machine, modify the BIOS settings.
D.    Delete, and then recreate the RDS Virtual virtual switch.
E.    On each virtual machine, modify the Hardware Acceleration settings of the network adapter.

Answer: DE

QUESTION 134
Your network contains a server named Server1 that runs Windows Server 2012 R2. Server1 is a member of a workgroup.
You need to configure a local Group Policy on Server1 that will apply only to non- administrators.
Which tool should you use?

A.    Server Manager
B.    Group Policy Management Editor
C.    Group Policy Management
D.    Group Policy Object Editor

Answer: D

QUESTION 135
Your network contains an Active Directory domain named contoso.com.
The domain contains a server named Server! that runs Windows Server 2012 R2.
Server1 contains a virtual machine named VM1 that runs Windows Server 2012 R2.
You need to ensure that a user named User1 can install Windows features on VM1.
The solution must minimize the number of permissions assigned to User1.
To which group should you add User1?

A.    Administrators on VM1
B.    Power Users on VM1
C.    Hyper-V Administrators on Server1
D.    Server Operators on Server1

Answer: A
Explanation:
In Windows Server 2012 R2, the Server Manager console and Windows PowerShell-cmdlets for ServerManager allow installation of roles and features to local or remote servers, or offline virtual hard disks (VHDs).
You can install multiple roles and features on a single remote server or offline VHD in a single Add Roles andFeatures Wizard or Windows PowerShell session. You must be logged on to a server as an administrator to install or uninstall roles, role services, andfeatures. If you are logged on to the local computer with an account that does not have administrator rights onyour target server, right-click the target server in the Servers tile, and then click Manage As to provide anaccount that has administrator rights. The server on which you want to mount an offline VHD must be added toServer Manager, and you must have Administrator rights on that server.
http://technet.microsoft.com/en-us/library/hh831809.aspx

QUESTION 136
Your network contains an Active Directory domain named adatum.com. The domain contains a member server named LON-DC1. LON-DC1 runs Windows Server 2012 R2 and has the DHCP Server server role installed. The network contains 100 client computers and 50 IP phones. The computers and the phones are from the same vendor.
You create an IPv4 scope that contains addresses from 172.16.0.1 to 172.16.1.254.
You need to ensure that the IP phones receive IP addresses in the range of 172.16.1.100 to 172.16.1.200. The solution must minimize administrative effort.
What should you create?

A.    Server level policies
B.    Filters
C.    Reservations
D.    Scope level policies

Answer: D

QUESTION 137
Your network contains an Active Directory forest. The forest contains a single domain named contoso.com. The domain contains four domain controllers.
The domain controllers are configured as shown in the following table.

wps1B7A.tmp_thumb

You plan to deploy a new domain controller named DC5 in the contoso.com domain.
You need to identify which domain controller must be online to ensure that DC5 can be promoted successfully to a domain controller.
Which domain controller should you identify?

A.    DC1
B.    DC2
C.    DC3
D.    DC4

Answer: D

QUESTION 138
You have a server named Server 1. Server1 runs Windows Server 2012 R2.
Server1 has a thin provisioned disk named Disk1.
You need to expand Disk1.
Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)

A.    From File and Storage Services, extend Disk1.
B.    From File and Storage Services, add a physical disk to the storage pool.
C.    From Disk Management, extend the volume.
D.    From Disk Management, delete the volume, create a new volume, and then format the volume.
E.    From File and Storage Services, detach Disk1.

Answer: AB

QUESTION 139
Your network contains an Active Directory domain named contoso.com.
The domain contains a member server named HVServer1.
HVServer1 runs Windows Server 2012 R2 and has the Hyper-V server role installed.
HVServer1 hosts two virtual machines named Server1 and Server2.
Both virtual machines connect to a virtual switch named Switch1.
On Server2, you install a network monitoring application named App1.
You need to capture all of the inbound and outbound traffic to Server1 by using App1.
Which two commands should you run from Windows PowerShell? (Each correct answer presents part of the solution. Choose two.)

A.    Get-VM “Server2” | Set-VMNetworkAdapter -IovWeight 1
B.    Get-VM “Server1” | Set-VMNetworkAdapter -Allow/Teaming On
C.    Get-VM “Server1” | Set-VMNetworkAdapter -PortMirroring Source
D.    Get-VM “Server2” | Set-VMNetworkAdapter -PortMirroring Destination
E.    Get-VM “Server1” | Set-VMNetworkAdapter -IovWeight 0
F.    Get-VM “Server2” | Set-VMNetworkAdapter-AllowTeaming On

Answer: CD

QUESTION 140
Drag and Drop Question
You plan to deploy a DHCP server that will support four subnets.
The subnets will be configured as shown in the following table.

wps7EB0.tmp_thumb[2]

You need to identify which network ID you should use for each subnet.
What should you identify? To answer, drag the appropriate network ID to the each subnet in the answer area.

wpsBDC3.tmp_thumb[2]

Answer:

wpsF6AF.tmp_thumb[2]

Lead2pass Microsoft 70-410 practice question and answer PDF set is developed using the latest Microsoft exam content published by Microsoft. Every Microsoft 70-410 exam question is verified and detailed descriptions are given to understand the answer fully. Microsoft’s comprehensive and relevant answers along with examples help the user grasp the concepts thoroughly.

http://www.lead2pass.com/70-410.html

         

Why Choose Lead2pass?

If you want to pass the exam successfully in first attempt you have to choose the best IT study material provider, in my opinion, Lead2pass is one of the best way to prepare for the exam.

Lead2pass Testking Pass4sure Actualtests Others
$99.99 $124.99 $125.99 $189 $29.99-$49.99
Up-to-Dated
Real Questions
Error Correction
Printable PDF
Premium VCE
VCE Simulator
One Time Purchase
Instant Download
Unlimited Install
100% Pass Guarantee
100% Money Back

Comments are closed.