Free Lead2pass 70-342 PDF and VCE Dumps — 100 Percent Pass Guarantee (51-60)

Lead2pass provide the best training material for Microsoft 70-342 certification exams. When you use our products Lead2pass ensure that you emerge successful in your certification exam. We provide with the latest 70-342 exam dumps, you can easily pass your certification exam with our exam dumps.

QUESTION 51
Drag and Drop Question
You have an Exchange Server 2013 database availability group (DAG). Each member of the DAG has two network interfaces named Network1 and Network2. Network1 is used for client connections. Network2 is used for database replication.
Network2 fails.
You discover that replication traffic is sent over Network1.
You need to ensure that all of the database replication traffic is sent over Network2.
The solution must minimize database replication downtime.
Which three actions should you perform? To answer, move the three appropriate actions from the list of actions to the answer area and arrange them in the correct order.

wps2376.tmp_thumb

Answer:

wps44DC.tmp_thumb

QUESTION 52
You have an Exchange Server 2013 organization that contains two servers.
The servers are configured as shown in the following table.

wps7D89.tmp_thumb[2]

EX1 and EX2 are members of a database availability group (DAG) named DAG1.
You have a database named DB1 that replicates to EX1 and EX2. EX1 fails.
You discover that DB1 does not mount on EX2.
You view the status of the mailbox databases as shown in the following table.

wpsBEAF.tmp_thumb

You need to ensure that the database attempts to mount on EX2 if EX1 fails.
What should you change?

A.    The AutoDatabaseMountDial setting to Lossless
B.    The AutoDatabaseMountDial setting to BestAvailabilty
C.    The activation preference of DB1\EX2
D.    The activation preference of DB1\EX1

Answer: B
Explanation:
* The MailboxServer.AutoDatabaseMountDial property gets or sets the automatic database mount behavior for an Exchange server that is running the Mailbox server role in a continuous replication environment after a database failover.
* The AutoDatabaseMountDial property specifies the automatic database mount behavior of a Mailbox server after a failover. Each behavior is based on the copy queue length, or the number of logs that are recognized by the passive copy that need to be replicated. If the copy queue length is greater than the value specified for the behavior, the database does not automatically mount. If the copy queue length is less than or equal to the value specified for the behavior, the Mailbox server tries to copy the remaining logs to the passive copy and mounts the database.
* BestAvailability
The database automatically mounts immediately after a failover if the queue length is less than or equal to 12.
Incorrect:
Not A: Lossless
The database does not automatically mount until all logs generated on the active device are copied to the passive device
http://msdn.microsoft.com/en-us/library/microsoft.exchange.data.directory.management.mailboxserver.autodatabasemountdial%28v=exchg.150%29.aspx

QUESTION 53
Your company has a data center in New York and a data center in Miami.
The company has an Exchange Server 2013 organization that contains a database availability group (DAG).
The DAG contains servers in both data centers.
The company plans to deploy Outlook Anywhere to all users.
You configure the following:
– All of the Exchange Server 2013 virtual directories in the New York data center use a host name of mail.contoso.com.
– All of the Exchange Server 2013 virtual directories in the Miami data center use a host name of miami.mail.contoso.com.
– In each data center, a certificate from an enterprise certification authority (CA) is configured to contain the following:
– A certificate principal name of mail.contoso.com
– Subject alternate names of mail.contoso.com and miami.mail.contoso.com
You need to recommend which task must be performed to meet the following requirements:
– Users always must attempt to connect first to a server in the data center where their mailbox is located.
– Users must be able to access their mailbox if a single data center fails.
What should you recommend?

A.    Change the external host name of the Miami data center to mail.contoso.com.
B.    Modify the ExternalUrl of the Autodiscover virtual directory of the Client Access servers.
C.    Run the Set-OutlookProvider cmdlet.
D.    Run the Add-AvailabilityAddressSpace cmdlet.

Answer: B
Explanation:
http://technet.microsoft.com/en-us/library/bb123683%28v=exchg.150%29.aspx
Use the Set-OutlookProvider cmdlet to set specific global settings using the msExchOutlookProvider attribute on the msExchAutoDiscoverConfig object in Active Directory.
A – wrong because that would only confuse the DNS resolution and not allow clients to connect to their site
B – Correct this is the only answer that specifies an external URL specific to each site
C – wrong because the Set-OutlookProvider cmdlet is Organization wide and not site-specific
D – wrong because this deals with free/busy information and not Outlook Anywhere connectivity

QUESTION 54
Your company has offices in Tokyo, Bangkok, and Shanghai.
All connections to the Internet are routed through an Internet connection in the Tokyo office. All of the offices connect to each other by using a WAN link.
The network contains 10 servers that have Exchange Server 2010 installed.
The servers are configured as shown in the following table.

wps2713.tmp_thumb

You plan to deploy 10 servers that will have Exchange Server 2013 installed.
The servers will be configured as shown in the following table.

wpsFE7E.tmp_thumb

Each site has an IP-PBX that provides telephony services for the mailboxes in that site by using unsecured SIP over TCP 5070. The IP-PBX uses the same port to connect to multiple SIP peers.
You need to recommend which tasks must be performed to ensure that the Unified Messaging (UM) features are available to the mailboxes if a single server fails.
Which three actions should you include in the recommendation? (Each correct answer presents part of the solution. Choose three.)

A.    Configure the Exchange Server 2013 Mailbox servers to listen to unsecured SIP on TCP 5070.
B.    Configure the Exchange Server 2013 Client Access servers to listen to unsecured SIP on TCP 5070.
C.    Install the Client Access server role on the Exchange Server 2013 servers in the Shanghai and Bangkok offices.
D.    Configure the Exchange Server 2013 Mailbox servers as additional SIP peers that contain new pilot identifiers.
E.    Configure the Exchange Server 2013 Client Access servers as additional SIP peers that contain new pilot identifiers.

Answer: BCE

QUESTION 55
You have an Exchange Server organization that contains five servers.
The servers are configured as shown in the following table.

wps3A76.tmp_thumb

You need to create a Lync Server SIP Unified Messaging (UM) dial plan to enable voice integration between Lync Server and Exchange Server.
Which three Exchange servers should you associate to the UM dial plans? (Each correct answer presents part of the solution. Choose three.)

A.    EX1
B.    EX2
C.    EX3
D.    EX4
E.    EX5

Answer: CDE
Explanation:
C: You can enable Unified Messaging (UM) in Microsoft Exchange Server 2010.
You must enable the Exchange computer running the Unified Messaging server role before the Unified Messaging server can process calls for UM-enabled Exchange 2010 recipients in your Exchange organization. However, the Unified Messaging server also must be added to a UM dial plan before it can process calls for Unified Messaging.
D,E:
* Requirements and Recommendations
Client Access and Mailbox. In Microsoft Exchange Server 2013, Exchange UM runs as a service on these servers.
* Deploy the Exchange Mailbox server roles in each Exchange Unified Messaging (UM) forest where you want to enable users for Exchange UM.
http://technet.microsoft.com/en-us/library/aa996399%28v=exchg.150%29.aspx

QUESTION 56
Drag and Drop Question
You have a server that has Exchange Server 2013 installed.
You plan to configure Unified Messaging (UM) to connect to an IP-PBX.
A telecommunications administrator configures the following numbers on the IP-PBX:
– First extension number: 12100
– Last extension number: 12499
– Help extension number: 12500
– Incoming pilot number: 12000
You need to configure UM to support the following requirements:
– Users must be able to use Outlook Voice Access.
– Users must be able to receive voice mail when callers connect to the users’ extension.
– Callers must be able to dial into an automated help system hosted by your company, which uses standard menus and speech-enabled menus.
Which numbers should you use for the UM configurations? To answer, drag the appropriate number to the correct UM object in the answer area. Each number may be used once, more than once, or not at all. Additionally, you may need to drag the split bar between panes or scroll to view content.

wps7F14.tmp_thumb[2]

Answer:

wpsB236.tmp_thumb[2]

QUESTION 57
Drag and Drop Question
You are an administrator for a company named Contoso, Ltd. The company is an international reseller that has offices worldwide. One of the offices is located in France.
Each office contains several servers that have Exchange Server 2013 installed.
The Exchange Server organization is configured for Unified Messaging (UM).
Each office contains an IP-PBX device.
You need to ensure that callers to the France office can navigate the voice mail system menu in French.
In which order should you perform the actions? To answer, move all actions from the list of actions to the answer area and arrange them in the correct order.

wps7891.tmp_thumb

Answer:

wps9BDB.tmp_thumb

QUESTION 58
You have an Exchange Server 2013 organization.
You successfully migrate the public folders from a previous version of Exchange Server.
You discover that one of the public folder mailboxes almost reached its quota size.
You need to move some of the public folders in the public folder mailbox to another public folder mailbox.
What should you run?

A.    Split-PublicFolderMailbox.ps1
B.    Set-MailPublicFolder
C.    Update-PublicFolderMailbox
D.    Set-PublicFolderMailbox

Answer: A
Explanation:
You can either perform a publicfoldermoverequest, or run the splitpublicfoldermailbox.ps1 script.
* Split-PublicFolderMailbox.ps1
Splits the given public folder mailbox based on the size of the folders.
* If the content of a public folder mailbox begins to exceed your mailbox quotas, you may need to move public folders to a different public folder mailbox.
There are a couple ways to do this. To move one or more public folders that don’t contain subfolders, you can use the PublicFolderMoveRequest cmdlets.
Reference: Move a Public Folder to a Different Public Folder Mailbox

QUESTION 59
You have a hybrid deployment of Exchange Server 2013 and Microsoft Office 365. The network does not have Active Directory Federation Services (AD FS) 2.0 installed. A user named User1 reports that he cannot access his mailbox because his account is locked out.
You verify that the mailbox of User2 is hosted on Office 365.
You need to unlock the account of User1. Which cmdlet should you run?

A.    Set-MailUser
B.    Set-MSolUser
C.    Set-Mailbox
D.    Set-ADUser

Answer: B
Explanation:
Applies To: Office 365, Windows Azure, Windows Intune
The Set-MsolUser cmdlet is used to update a user object.
Parameters include:
-BlockCredential <Boolean>
When true, the user will not be able to sign in using their user ID.
Incorrect:
Not C: Set-Mailbox
Use the Set-Mailbox cmdlet to modify the settings of an existing mailbox.
Applies to: Exchange Server 2013, Exchange Online
http://blogs.inframon.com/post/2012/08/07/Office-365-User-Account-Lockout.aspx

QUESTION 60
You have a hybrid deployment of Exchange Server 2013 and Office 365. The mail flow between Office 365 and the on-premises Exchange Server environment is routed through an Exchange Server 2010 Edge Transport server.
Your company is assigned a new set of public IP addresses. A network administrator updates the external firewall address and all of the associated DNS records.
Office 365 users report that they cannot receive email messages from on-premises users.
You discover that outgoing email messages to Office 365 are in the Office 365 SMTP queue on an Edge server.
You need to ensure that the on-premises users can send email messages successfully to the
Office 365 users. Which tool should you use?

A.    The Exchange Management Console
B.    The Exchange Control Panel in Office 365
C.    The Exchange Admin Center
D.    The Exchange Remote Connectivity Analyzer

Answer: C

Lead2pass Microsoft 70-342 exam pack will raise your capability to understand exam basics and fundamentals in a more organized and flexible way. Once you have prepared effectively through Lead2pass Microsoft 70-342 exam pack you can predict about exam difficulty level, accordingly you can take several measures to cope with such difficulties and pass your exam easily.

http://www.lead2pass.com/70-342.html

         

Why Choose Lead2pass?

If you want to pass the exam successfully in first attempt you have to choose the best IT study material provider, in my opinion, Lead2pass is one of the best way to prepare for the exam.

Lead2pass Testking Pass4sure Actualtests Others
$99.99 $124.99 $125.99 $189 $29.99-$49.99
Up-to-Dated
Real Questions
Error Correction
Printable PDF
Premium VCE
VCE Simulator
One Time Purchase
Instant Download
Unlimited Install
100% Pass Guarantee
100% Money Back

Comments are closed.