Free Download Lead2pass Latest Microsoft 70-246 Exam Dumps and Questions (41-50)

The Lead2pass New Microsoft 70-246 practice Tests helps the user to keep a check on their learning and understanding and improve for the Microsoft 70-246 exam. Lead2pass makes you pass your exam much easier.

QUESTION 41
Your company has a private cloud that is managed by using a System Center 2012 infrastructure. An administrator installs a new tape drive on a server that has Data Protection Manager (DPM) installed.
You discover that the tape drive is unavailable from the DPM Administrator console.
You verify that the tape drive is installed correctly on the DPM server.
You need to ensure that the tape drive is available from the DPM Administrator console.
What should you do from the DPM Administrator console?

A.    From the Agents view, click Install.
B.    From the Disks tab, click Add.
C.    From the Protection view, click Tape.
D.    From the Libraries view, click Rescan.

Answer: D
Explanation:
To configure tape libraries
In DPM Administrator Console, on the navigation bar click Management, and then click the Libraries tab.
In the Actions pane, click Rescan.
The Rescan operation might take several minutes to complete. DPM will add any library jobs to the queue that began during the Rescan operation. If a library job is already in progress when the Rescan operation begins, the Rescan operation will fail.
Configuring Tape Libraries
http://technet.microsoft.com/en-us/library/ff399665.aspx

QUESTION 42
Your company has a private cloud that is managed by using a System Center 2012 infrastructure. You install the servers shown in the following table.

wps81B8.tmp_thumb

The company’s compliance department identifies the following tasks that must be performed:
– Back up individual files from VM1.
– Back up the configuration settings of VM1.
– Restore the configuration settings of VM1.
– Restore individual files from VM1 to an alternate location.
The compliance department administrators recommend installing the DPM agent on Server1, and then performing a full backup.
You need to identify which task is NOT met by the recommended solution.
Which task should you identify?

A.    Restore individual files from VM1 to an alternate location.
B.    Restore the configuration settings of VM1.
C.    Back up the configuration settings of VM1.
D.    Back up individual files from VM1.

Answer: B

QUESTION 43
Your company has a datacenter in Los Angeles. The datacenter contains a private cloud that is managed by a System Center 2012 Virtual Machine Manager (VMM) infrastructure.
The infrastructure contains two management servers and 10 Hyper-V hosts.
You configure VMM to use an update server and to synchronize the updates by using a windows Server Update Services (WSUS) server named WSUS1.
You attempt to verify compliance with the Sample Baseline for Security Updates.
You view the console as shown in the exhibit. (Click the Exhibit button.)

wpsC30D.tmp_thumb

You need to ensure that you can verify compliance for all of the Hyper-V hosts.
What should you modify?

A.    the update classifications of the update server
B.    the Assignment Scope of the baseline
C.    the default configuration provider
D.    the Network settings of the All Hosts host group

Answer: B

QUESTION 44
Your company has a private cloud that is managed by using a System Center 2012 infrastructure. The network contains seven servers.
The servers are configured as shown in the following table.

wpsFD01.tmp_thumb

You need to recommend a solution to apply Windows updates to the virtualization hosts.
The solution must meet the following requirements:
– Approve Windows updates from the VMM Administrator Console.
– Store information about Windows update installations in Configuration Manager reports.
What should you do first?

A.    From the VMM Administrator Console, add Server6 as a host server, and then install the Configuration Manager agent on Server1.
B.    From the VMM Administrator Console, add Servers as an update server, and then install the Configuration Manager agent on all of the visualization hosts.
C.    On Server7, install Windows Server Update Services (WSUS), and then install the Configuration Manager agent on Server1.
D.    On Server7, install Windows Server Update Services (WSUS), and then install the Configuration Manager agent on all of the visualization hosts.

Answer: B
Explanation:

QUESTION 45
Your company has a datacenter in Los Angeles that contains a private cloud. The private cloud is managed by using a System Center 2012 Operations Manager infrastructure.
You plan to create a distributed application named Appl.
You need to ensure that a folder for App1 is available from the Monitoring workspace in the Operations Manager console.
What should you do?

A.    Run the Protect-SCOMManagementPack cmdlet.
B.    Save App1 in the Default Management Pack.
C.    Run the Import-SCOMManagementPack cmdlet.
D.    Save App1 as a new management pack.

Answer: D

QUESTION 46
Your company has a private cloud that is managed by using a System Center 2012 Operations Manager infrastructure. From Operations Manager, you create a group named Group1.
You add multiple servers to Group1.
You have an Active Directory group named Group2.
You configure a dashboard for the users in Group2 to manage the client computers in Group1. You need to ensure that the users in Group2 can achieve the following tasks:
– View open critical alerts generated by Group1.
– Identify whether a monitor generated an alert.
Which object should you add to the dashboard?

A.    a state widget
B.    an alert widget
C.    an event view
D.    a state view
E.    an alert view

Answer: B

QUESTION 47
You deploy System Center 2012 Operations Manager.
You create two unsealed management packs named MP1 and MP2.
You create an override for MP1.
You create a group in MP2.
You need to apply the override for MP1 to the group in MP2.
What should you do before you apply the override?

A.    Create a new class in MP2.
B.    Seal MP1.
C.    Seal MP2.
D.    Create a new class in MP1.

Answer: C
Explanation:
When you create a group, you save it to an unsealed management pack. However, an element in an unsealed management pack, such as a group, cannot reference an element in a different unsealed management pack, such as an override or a view. If you are going to use a group to target an override or scope a view, you must either save the group to the same unsealed management pack as the override or view, or you must seal the management pack that contains the group. If you save the group to the same unsealed management pack as the override or view, you can only use that group for overrides and views that are also contained in that unsealed management pack. If you seal the management pack that contains the group, you can reference that group from other unsealed management packs. However, you cannot easily change any group settings in the sealed management pack or add new groups to the sealed management pack.
http://www.code4ward.net/main/Blog/tabid/70/EntryId/130/Implications-when-using-groups-from-a-sealed-MPfor-overrides.aspx

QUESTION 48
Your company has a datacenter in Los Angeles. The datacenter contains a private cloud that is managed by using a System Center 2012 infrastructure. A server named VMM1 hosts the System Center 2012 Service Manager management server. A server named Server2 hosts the System Center 2012 Orchestrator management server.
You plan to use a runbook named Book1 to update the status of Service Manager incidents.
You need to ensure that you can create Book1, and then reference the runbook in Service Manager.
What should you do? (Each correct answer presents part of the solution. Choose all that apply.)

A.    From the Service Manager Console, add an incident event workflow.
B.    From the Service Manager Shell, run the Set-SCDWJobSchedule cmdlet.
C.    From the Orchestrator Deployment Manager, register the Integration Pack for System Center Service Manager.
D.    From the Service Manager Console, create an Orchestrator connector.
E.    From the System Center 2012 Orchestrator Runbook designer, create a connection.
F.    From the Service Manager Shell, run the Enable-SCDWJobSchedule cmdlet.

Answer: CDE

QUESTION 49
Your company has a private cloud that contains a System Center 2012 infrastructure.
The network contains a Service Manager infrastructure and an Orchestrator infrastructure.
You plan to configure the private cloud to meet the following requirements:
– Integrate runbooks to Service Manager requests.
– Automate administration tasks by using runbooks.
– Provide end users with the ability to perform administrative tasks.
You need to configure the private cloud to meet the requirements.
What should you do from Service Manager?

A.    Register the Orchestrator Integration Packs.
B.    Create an Exception Management Workflow.
C.    Register a data source.
D.    Select the sync folder for the Orchestrator connector.

Answer: D
Explanation:
After importing into Orchestrator and setting up connections, you need to sync from Service Manager (make the run books available).

QUESTION 50
Drag and Drop Questions
Your company has a private cloud that is managed by using a System Center 2012 infrastructure. The network contains an Orchestrator infrastructure and a Service Manager infrastructure.
You need to automate user account provisioning for the Self-Service Portal. The solution must ensure that new user accounts are approved by a member of the human resources department. You configure the Orchestrator connector.
Which five actions should you perform next? (To answer, move the appropriate actions from the list of actions to the answer area.)

wpsBA96.tmp_thumb

Answer:

wpsE39A.tmp_thumb

Explanation:
http://syscen.blogspot.com/2012/01/automating-new-user-creation-with-scsm.html http://syscen.blogspot.com/2012/02/automating-new-user-creation-with-scsm.html http://syscen.blogspot.com/2012/02/automating-new-user-creation-with-scsm_09.html http://syscen.blogspot.com/2012/02/automating-new-user-creation-with-scsm_15.html
1. Create Runbook Automated Activity Template
2. Extend service request class
3. Create Service Request template using the new Class and include the Runbook Automated Activity Template.
4. Create the Service Request Offering.

Lead2pass 70-246 material details are researched and created by the most professional certified authors who are regularly using current exams experience to create precise and logical dumps. You can get questions and answers from many other websites or books, but logic is the main key of success. And Lead2pass will give you this key of success.

http://www.lead2pass.com/70-246.html

         

Why Choose Lead2pass?

If you want to pass the exam successfully in first attempt you have to choose the best IT study material provider, in my opinion, Lead2pass is one of the best way to prepare for the exam.

Lead2pass Testking Pass4sure Actualtests Others
$99.99 $124.99 $125.99 $189 $29.99-$49.99
Up-to-Dated
Real Questions
Error Correction
Printable PDF
Premium VCE
VCE Simulator
One Time Purchase
Instant Download
Unlimited Install
100% Pass Guarantee
100% Money Back

Comments are closed.